Overview
According to IEC standard , special RJ45 plug socket is adopted, which can limit the surge to a certain voltage protection level in the shortest time (ps level), reduce the potential difference between wires, and protect the electronic circuit connected to the network communication port from lightning and transient high-voltage surge.
It is used to protect the interface between LPZ0B area and LPZ2 area and subsequent areas.
Main feature
Standard RJ45 Ethernet port
Fully shielded design
Wide frequency and small insertion loss
Suitable for protection of switches, workstations and various network communication equipment.
Main technical parameters
| Rated operational voltage | 5VDC |
| Maximum operating voltage Uc | 6VDC |
| Nominal operating current IL | 500mA |
| Nominal discharge current In (8 / 20μs) | 2.5kA |
| Total nominal discharge current Imax (8 / 20μs) | 20kA |
| Lightning surge current limp (10 / 350μs) | 0.5kA |
| Protection voltage Up (under In) (8 / 20μs) line-to-line | ≤35V |
| Protection voltage Up (under In) (8 / 20μs) line to ground | ≤600V |
| Bandwidth | 250MHz |
| Response time | ＜1ns |
| Enclosure protection grade (according to lEC60529) | IP 20 |
| Sheathing material | Black aluminum |
| Protection and line number | 1、2、3、4、5、6、7、8 |
| Interface type | RJ45 |
| Working temperature range | -40~+80℃ |
| Installation method | Optional DIN35mm rail mounting clamp |
| Grounding mode | 1.5mm² with length 2000mm grounding conductor |
| Test standard | GB/T/8802.21/IEC 61643-21 |
Outline dimension diagram
Wiring method
