Product Introduction
PH-SM100-W series HART intelligent converters are developed by using ARM microprocessor, HART protocol modulation and demodulation chip and experienced with a lot of practical applications. It is designed according to the requirements of industrial products and has high reliability and stability. The intelligent converter is equipped with standard RS232 interface and RS485 interface, which can transmit data transparently with intelligent instrument with HART protocol or read data into MODBUS_RTU protocol to ensure real-time data transmission.
The data collector is equipped with standard RS 485 interface, RS 232 interface and gateway, which can be transparently transmitted to the intelligent instrument with HART protocol or converted to MODBUS_RTU or MODBUS_TCP protocol to read data, so as to ensure real-time data transmission.
The HART protocol is complied with the standard of Bell202 Frequency Shift Keying (FSK), and modulate digital signals on a basis of 4~20mA, which leads the HART protocol instruments to bidirectional data communication without interfering the analog signal of 4-20mA. PH-SM100-M series HART Date collectors are for bidirectional modulation and demodulation with digital signals and analog signals.
Product Features
● equipped with standard RS232 and RS485 communication interface, you can configure parameters, change the communication baud rate and parity bit. and it is independent of the 1200 communication speed on the HART bus, thus improving the running speed of the whole system.
● Adopted with industrial General Module shell , easy to install and debug.
● With exclusive configuration software, it can be configured with parameters, and communicate with HART Protocol intelligent Instrument for data transfer
● support standard MODBUS_RTU and MODBUS_TCP protocol
● Supports simultaneous connection with multiple HART protocol intelligent Instruments
● HART channels isolated and do not affect with the instrument current output.
● support a variety of special HART protocol intelligent instruments, and can customize the reading of special HART instrument instructions.
● data update time is 0.8 seconds, if 8,6.4 seconds to update the data.
● installation: can be standard track installation, but also fixed installation.
Product Specification
|
1) Rosemont Series HART Instruments |
||
|
3300 Radar level gauge |
1700(2700) Transmitter |
Electromagnetic Flowmeters of 8700 Series |
|
Radar level Gauges of 5400 Series |
Integrated Temperature Transmitter 248 |
Multivariable Transmitter |
|
pressure transmitter of 1151 series |
Vortex Flowmeter 8800C |
|
|
2) Siemens Series |
||
|
Electromagnetic Flowmeter MG6000 |
Ultrasonic Flowmeters FUS06 |
Ultrasonic Flowmeters FUS010 |
|
Mass Flowmeter MASS6000 |
Gas Flowmeter 7ME5033 |
Gas Flowmeter 7ME5034 |
|
level gauge HR02(FN34) |
|
|
|
3)KROHNE Series |
||
|
IF100 Electro magnetic Flowmeter |
Electromagnetic Flowmeter IF300 |
Electromagnetic Flowmeter IF090 |
|
Flowmeter OPTISWIRL4070 |
Radar Geometry BM700 |
Gas Flowmeter VFC070 |
|
Flowmeter UFC500 |
|
|
|
4 ) ABB series |
||
|
WateMaster Flowmeter FEX10 |
Flowmeter FEP300 |
pressure transmitter 2600T |
|
FEP 300 Flowmeter |
FEH 300 Flowmeter |
Rotor Flowmeter AM54 |
|
5)E+H series |
||
|
Flowmeters of NMS 53X Series |
Tablet of FMR 53X Series |
level gauge of FMU 40X series |
|
Differential pressure transmitter PDM 23X (26X) |
Liquid Level Meter of FMR 23X (24x) Series |
mass flow meter Prowirl 72 |
|
6) Yokogawa Series |
||
|
Electromagnetic-Flowmeters YOKOGAWA AX Series |
pressure transmitter of EJA series |
|
|
7) other types of HART instruments |
||
|
smart pressure gauges of LD301 series |
ultrasonic level transmitter of MSP400R |
FISHERMETER Vortex Shedding Flowmeter VT5000 |
|
metal tube float flowmeter of F56 series |
Metal Tube Float Flowmeters of HT50 Series |
Radar Material Level Meter VAG |
|
Electromagnetic Flowmeter Toshiba |
|
|
Connecting Diagram
Product selection
Product Display
